HTX - High Density Horizontal Foam Saw

  • HTX 51-88 VBA High Density Horizontal Foam Saw
  • HTX 51-88 PVT High Density Horizontal Foam Saw
  • HTX-C-60-118 High Density Horizontal Foam Saw

HTX - Horizontal High-Density High-Speed Foam Saw

The HTX line of slitters are high-speed, high-tension and high-precision slitting machines capable of accurately converting a wide range of PU foam blocks into sheets. Industries commonly serviced by the HTX slitters are: bedding, furniture, upholstery, automotive and packaging.

HTX Foam Saw Machine Sizes

Machine Sizes
HTX 51-88 PVT Or HTX 51-88 VBA HTX 60-88 PVT Or HTX 60-88 VBA HTX 51-96 PVT Or HTX 51-96 VBA HTX 60-96 PVT Or HTX 60-96 VBA
Cutting height 51" (1295mm) 60" (1524mm) 51" (1295mm) 60" (1524mm)
Cutting width 88" (2235mm) 88" (2235mm) 96" (2438mm) 96" (2438mm)
Cutting length 132" (3350mm) 132" (3350mm) 132" (3350mm) 132" (3350mm)
Floor Space Required:
Width 160" (4064mm) 160" (4064mm) 167" (4241mm) 167" (4241mm)
Length 324" (8230mm) 324" (8230mm) 324" (8230mm) 324" (8230mm)
Height (max) 155" (3937mm) 173" (4394mm) 155" (3937mm) 173" (4394mm)

HTX Foam Saw Specifications

VBA (Vacuum Belt Assembly) PVT (Power Vacuum Table)
Blade Guide Tension Assembly Hydraulic tensioning system pulls 18,000lbs (8100kg) of tension on blade guide
Blade Tilt Power tilt assembly 1°-5°. Tilting is programmable for forward and return movement
Horizontal Movement Servo powered conveyor movement up to 300 ft/min (90 m/min) in either direction Servo driven with rack & pinion drive for table movement up to 300 ft/min (90 m/min) in either direction
Max Cutting Length 11’ (3.35m) Cutting Length, Conveyor Length 22’ (6.7m) 11’ (3.35m)
Table Height from Floor 24" (60.96cm)
Table Surface Perforated PVC belt Composite aluminum table top with high pressure laminate facing
Vacuum Hold Down 4 zone vacuum hold with independent AC drives for control of each zone
Airlift Assembly* Optional airlift assembly for assisted block positioning
Blades Range of blades may be used including serrated, saw tooth, and knife; standard is 1¼" (3.18cm) wide and 0.02" (0.05cm) thick
Blade Wheels 14" (355mm) Diameter blade wheels with urethane elastomer surface
Blade Motor 10 HP blade motor powered by an AC drive. Blade runs at no load speed of 3600 ft/min (1097.3m/min)
Heavy-Duty Blade Guide Teflon coated heavy-duty blade guide 0.188” (.478cm) x 2.50” (6.35cm) wide
Hydraulic tensioned to 18,000lbs (8100kg)
Blade Sharpener* Optional blade sharpening system is recommended for use with knife blades. Sharpener is equipped with long life CBN sharpening wheels and is pneumatically actuated. Hand knob adjustment for fine tuning upper and lower sharpening wheels
Automated Silicone Application System* Optional silicone dispensing system coats both the top and bottom of the blade guide assembly to reduce friction between the guide, cut sheets, and the block of material
Controls PLC control with PC interface
Control Panel Air Conditioner Air conditioner to cool critical electrical components
Safety Package and Electrical Standards Built to CE standards
Operator Console Controls are mounted on freestanding pedestal. User friendly touch screen interface. Joystick for manually jogging the cutting head and block
Power Utilizes 480V, three-phase power and may be supplied for 50 or 60Hz operation
Shipping Weight 9,800lbs (4,450kg) 7,000lbs (3,175kg)
Contact Us
For more information :

Para Español :
616-453-5458 ext. 217

Fax :

Email :

contact us