Two Wheel Slitter Foam Saws image


Model 10 Foam Saw


The Model 10 Foam Saw series is a two-wheel horizontal foam saw for slitting sheets up to 12” (305mm) thick. The machine is available with a powered table or conveyor movement system and can be built as a basic model with a standard control system or with a PLC when the highest accuracy is required.


Table


The standard table length is 11' (3353mm) with wood top coated in Ferrox™. Table rails are steel tubing and wheels have sealed bearings with nylon tires.

Blade - Blade Guide - Blade Wheels


  • Typically uses a serrated saber tooth blade, but can use a saw-tooth or knife blades. The blade sharpener should be included when cutting with the knife blade to ensure longer life and optimum cutting performance.
  • Indexing thickness is 0.001”.
  • Standard cutting head blades run on 14” (355mm) diameter wheels that feature a molded urethane elastomer coating.
  • Standard blade is 1” (25mm) wide x 0.02” (0.5mm) thick.
  • Blade motor is 5HP and allows the blade to run at a no load speed of 4200FPM (1280m/min).
  • A Teflon coated blade guide 0.084” (2mm) x 3.125” (79mm) wide, die spring tensioned, is supplied with each machine. This can be upgraded to a heavy duty Teflon guide 0.314” (8mm) x 3.125” (79mm) wide or blade guide stabilizer if the material being cut requires additional support.
  • Tilt of 0 to 5 degrees.
  • Air positioned blade sharpener using long life Borazon (TM) wheels is supplied as standard.
  • 14" diameter blade wheels with steel tire surface and aluminum ball type bearings.


Optional Features


  • 9' (2743mm) long table
  • Variable speed powered table fully automatic operation; forward speed 0 to 100 ft/minute (30 m/minute); reverse speed constant or variable
  • Blade sharpener
  • Pressure roll assembly
  • Heavy duty guide for foams under .0375 thickness
  • Conveyor with speed range of up to 150 FPM
  • Raise cutting height from 36" (914mm) to 48" (1219mm)
  • Vacuum table assembly with 16" chamber, centered under blade, 10 HP motor
  • Left side of the head with powered tilt up to 12 degrees (Model 10-72 only)

Foam Saw Specifications


 

10-36

10-48

10-72

10-84

Throat capacity – stack height below blade

12” (305mm)

12” (305mm)

12” (305mm)

12” (305mm)

Maximum blade height above table

36” (914mm)

36” (914mm)

36” (914mm)

36” (914mm)

Cutting width

36” (914mm)

48” (1219mm)

72” (1829mm)

84” (2134mm)

Floor Space Required:
Width
92" (2286mm)
104" (2642mm)
126” (3200mm)

140” (3556mm)

Height
90" (2286mm)
90" (2286mm)
90" (2286mm)

90" (2286mm)

Length
240" (6096mm)
240" (6096mm)
240" (6096mm)
240" (6096mm)

Request Information


*First (or given) Name:


*Surname (family) Name:


*Your E-Mail Address:


*Your Company:


Phone Number:


Any further information: